Emerson/Westinghouse 7379A90G06 Control Card

Emerson/Westinghouse 7379A90G06 Control Card

Brand: Emerson

Module: 7379A90G06

Description: Control Card

Product Orgin: USA

Field power supplied to this device, either at the field terminal or as bussed field power through the carrier, must be removed before removing or connecting the device. This unit may be removed or inserted while system power is energized under the following conditions: (Note Only one unit at a time may be removed with system power energized.)
When used with KJ1501X1-BC1 System Dual DC/DC Power Supply operating on 24 VDC or 12 VDC input power. The primary circuit wiring inductance for input power must be less than 23 uH, or a certified supply with an open circuit voltage, Ui of 12.6 VDC and an Lo of less than 23 uH (including wire inductance).
Non sparking field circuits MUST be deenergized before removing and inserting this product. A terminal block fuse may NOT be removed with field power energized for non-sparking circuits.

Introduction to Xiongba Industrial Control

Xiongba Industrial Control has been working in the field of industrial automation parts since 2002. We mainly supply automation parts to heavy industrial manufacturers around the world. We have PLCS, DCS, operating panels, servo drives and servo motors, exciter boards, other electrical equipment parts in stock and also offer in production products.We have a global shared inventory and 16 regional warehouses in 6 countries, with sufficient stock and fast delivery.