Bently Nevada 3500/45 Position Monitor ModuleEach module occupies two slots within the system. Placing multiple CMM modules allows the connection of two independent System 1 clients to the Orbit 60 System. Data is transferred to System 1 continuously, but in the event the connection is lost or System 1 is not utilized, non-volatile storage buffers historical data until the information is off-loaded to the host software. 3500/45 System 1 can configure the CMM module to extract additional measurements and waveforms from system sensor data.
Brand:BENTLY NEVADA
Model:3500/45
Part No:
Product Name:Aeroderivitive GT Vibration Monitor
Website:www.plc-module.com
Accepts from 1 to 4 signal inputs
Front panel LED indicators
1 full-height front slot
Outputs: OK, TX/RX, Bypass LEDs
Signal conditioning at 25°C (77°F)
Machinery protection
Essential machine information
Bently Nevada 3500/45 was a privately held US corporation between 1961 and 2002, during which time it pioneered the eddy-current proximity probe, a sensor that revolutionized the measurement of vibration in high-speed turbomachinery by allowing the direct observation of the rotating shaft. The company also performed significant research in the field of rotordynamics, furthering knowledge of machinery malfunctions such as shaft cracks and fluid-induced instabilities. Its research also helped refine the equations used to describe vibratory behavior in rotordynamic systems.
The 3500TMR configuration performs the monitor voting function by selecting the install function of the MONITOR option. In this way, the TMR TDI continuously compares the output of the three redundant monitors. If the TMR TDI detects that the output of one monitor is not equal to the output of the other two monitors (within a percentage of the configuration), it issues an error indication to the monitor.
Reviews
There are no reviews yet.