DEIF SCM-1 Synchronizing/Measuring Module

Many products are not yet on the shelves please contact us for more products

.If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation

.We have 16 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible

DEIF SCM-1 Synchronizing/Measuring Module.The Synchronizing/Measuring Module (SCM) is a multi-functional module which consists of a synchronizer, a generator breaker control unit and a multi-transducer unit. One SCM-1 can control one generator set with regard to frequency/active power control (speed control), breaker ON/OFF control and voltage/reactive power control, generator protection (I>, P> and –P>) and busbar supervision (UBB>, UBB<, fBB> and fBB<)

The synchronizer operates according to settings received from the Control Module (the operator can change the settings via the Control Panel). The synchronization is carried out as a dynamic synchronization with regard to: – ∆frequency: synchronization is always carried out over-synchronous with regard to a programmable nominal frequency, so that the engine takes load immediately when connected to the busbar. – ∆voltage: the connection to the busbar will take place only if the difference between the voltage on the busbar and the generator voltage is less than a programmable ∆voltage value. – ∆angle: the connection to the busbar will take place only when there is coherent phase angle between the busbar voltage and the generator voltage with regard to the generator breaker closing time (programmable). The frequency/power (engine speed) and/or generator voltage are controlled by PI regulators, which operate according to the measured frequency/power and voltage/reactive power. The outputs from the PI regulators are connected to analog outputs for electronic speed governor (ESG) and electronic voltage regulator (EAVR). Separate relay outputs for Mechanical Speed Governors (MSG) and Mechanical Voltage Regulators (MAVR) can be installed in the SCM-1. The frequency/power (engine speed) and/or generator voltage may be manually controlled via incr./decr. inputs on the SCM-1 module.

DEIF SCM-1 Synchronizing/Measuring Module

PARTS YOU MAY NEED FOR YOUR PROJECT:

DPD02027
DPD08063
DU-2/MKII
DU21DGU-1
ENERCONGCP3
FAS-113DG
GPU/2/GS
HAS-111DG
IOM41
IOM4-1
IOM42
IOM5-1
IPM-1
LSU-112DG
LSU113DG
LSU-113DG
MDR-2
OPM-1
PCM41
PCM4-1
PCM42
PCM43
PCM44
PCM5-1
PPU2
PPU-3
RMC-111D
RMC-131D
RMC-131D/2
RMF-112D
RMV-112D
SCM-1
SCM41
SCM4-1
SCM42
SCM4-2
SMC-C
TAC-311DG
More DEIF products…